Cinelli M71 clipless Pedals 1974

The 4th  generation of the first modern clipless pedal launched in 1970. 

Scorpio 1988

Scorpio 1988

A luged steel frame made in a small shop  near Frankfurt  / Germany by  Bernd Gaessler . All frames he made  had custom geometry due to the manual manufacturing process. He used for his frames all kind of commercially available light weight tubing from Reynolds and Columbus.

The bike is equipped with the first generation Campagnolo C-Record groupo and Campagnolo Record pave rims. The cranks are polished and chromed for optical reasons. 

George Hincapie Team Columbia 2008 Giant Prototype

George Hincapie Team Columbia 2008 Giant Prototype size XL spare frame/bike with uncut seat post / mast

This is a new never build up Giant Team Columbia (High Road) 2008 prototype of the size XL. Only the SRM wire harness is assembled. The short stem is attached to hold the fork / headset bearings in place.

The geometry is to the Giant stock dimensions. I have seen on the smaller sizes (S and M) that the top tube was around 15 mm longer than stock. The stock frames had a designated size call out SS and MS means Small Standard (Stock) and Medium Standard Stock dimensions.

But on all frames of 2008 is the drive side BB configuration of the 86.5mm by 41mm standard change in the way that only the generic standard BB ball bearing 37x25x6 [mm] can be pressed in. The ball bearing was machined (two longitudinal cuts 180 deg apart with the hacksaw to release the press fit by reducing hoop stress) out of the Standard DA outboard cups. In the picture above you can see the Ball bearing pressed in and standard plastic bushing.

With this change the clearance get bigger between the SRM power cranks and the BB housing, and the O.D. of the bearing has firm contact alignment to the machine metal housing, instead to be embedded into a plastic housing with 2mm wall thickness.

On the non-drive side you see the standard configuration of the 86.5 by 41 standard and the aluminum insert of the drive side with significant higher wall thickness.

The wire harness for the SRM system which enter into the frame in front of the BB, in the

hole foreseen for the outlet of the shifter cable, exits the frame near the front brake cable stop.

If the SRM cable is now routed parallel to the brake cable in a heat shrinkable hose it

looks like a wireless system.

An update will follow how it looks with the SRM Power cranks, the speed and power sensor in place.

LINK: http://www.georgehincapie.com/gallery/

scroll down to 2008 Tour de France

Ralph Berner - Allan Cross Carbon - 1993 vice Word Champion

Ralph Berner - Allan Cross Carbon - 1993 - 2nd at World Championship 

Eddy Merckx Kessels Molteni SN#292 - early 70ties

One of the earliest Eddy Merckx bikes in classic Molteni colors made by the belgium company KESSELS. The most distinguishable difference to the Italien makes is the longer wheel base by increased length of the chain stays .

Klaus peter Thaler -Puch Ultima-1983 Tour de France

DiDi Thurau 1979 Luik-Bastenaken-Luik / Liege-Bastogne-Liege / Lüttich-Bastogne-Lüttich

On this bike DiDi won Liege-Bastogne-Liege in 1979.